Attic Spray Foam Insulation Atlanta, GA 30303 | Atlanta Spray Foam Insulation

Spray Foam Insulation in Atlanta, GA (30303) · Local Professionals

Atlanta Spray Foam Insulation · Fast response in Atlanta and the Atlanta area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Atlanta's homes sit on red-clay Piedmont over vented crawl spaces and daylight basements, with air handlers and ductwork baking in attics that hit 150 degrees from May through September. Whether you're in a 1920s Craftsman bungalow on brick piers in Virginia-Highland or Inman Park, a 1950s brick ranch in Brookhaven, or a newer two-story with a finished room over the garage that never cools, your insulation and air sealing strategy has to match your specific building, your foundation type, and Atlanta's humid subtropical climate.

Atlanta Spray Foam Insulation has served homeowners and property managers across the city and surrounding areas since 2012. We show up with a free on-site assessment, write estimates that specify R-value and thickness, and leave your property clean. We know Atlanta's neighborhoods, its building stock, and the moisture and temperature challenges that drive every insulation decision in this city.

Spray Foam Insulation in Atlanta (30303)

Atlanta's insulation problems are shaped by its building era and the way homes are built here. Inside the Perimeter, 1900s-1930s Craftsman bungalows and mill cottages sit raised on brick piers above damp crawl spaces, with lap siding over empty wall cavities and vented attics. Beyond the Perimeter, 1950s-60s brick ranches have flattened original attic fill and poor air sealing around the rim joist. Newer subdivisions in Alpharetta, Roswell, Johns Creek and Marietta run two-stories with two-story foyers and vaulted great rooms, where the finished room over the garage or at the end of a duct run never reaches temperature because the attic above it is poorly insulated and the wall cavities are hollow. Across all of it, humidity and crawl space moisture drive every decision. An air handler and its ductwork in a vented attic that hits 130 to 150 degrees in summer loses conditioned air through uninsulated or poorly insulated ducts, and that loss shows up on your cooling bill. Damp insulation in a crawl space or condensation on rim joists and band joists means moisture is moving through those spaces, and wet insulation does not insulate. Closed-cell spray foam stops air and moisture movement both. Open-cell foam insulates and is vapor-permeable, which is the right choice in some applications and the wrong choice in others. We assess your specific building, your foundation, your attic configuration and your moisture profile, and we recommend the foam type and air sealing approach that works for your home.

Our team has been installing spray foam insulation in Atlanta and the surrounding areas for over a decade. We are fully insured, and we work in occupied homes with proper ventilation and a stated re-entry window so you know when the space is safe to use again.

Our services in Atlanta

Attic Spray Foam Insulation in Atlanta · Open-cell foam on the roof deck turns a 150°F Atlanta attic into conditioned…
Closed Cell Spray Foam Insulation in Atlanta · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Atlanta · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Atlanta · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Atlanta · Closed-cell foam on crawl space walls and rims holds back the humid air that…
Rim Joist & Band Joist Spray Foam in Atlanta · Rim joists over daylight basements and crawl spaces leak conditioned air at…
Garage Spray Foam Insulation in Atlanta · Garage ceilings under a bonus room and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Atlanta · Closed-cell foam is the insulation that stops a Georgia metal building from…
Commercial & New Construction Spray Foam in Atlanta · Warehouses; offices; churches; soundstages and production builders served on…
Insulation Removal in Atlanta · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Atlanta · The full reset: old material removed; gaps air-sealed…
Air Sealing in Atlanta · Top plates; can lights; chases; knee walls and attic hatches leak more cooled…

How a Job Works in Atlanta

We start with a free on-site assessment. You describe what brought you to us: a cooling or heating bill that has become unaffordable, a room that never reaches temperature, visible moisture or damp insulation in an attic or crawl space, or insulation that has failed and has to come out before anything else can happen. We walk the space, measure the area, identify what needs air sealing, and determine whether existing insulation has to be removed first. We give you a written estimate that specifies the R-value, thickness, and foam type we recommend, along with a firm price.

On the day of the work, our team sets up mechanical ventilation and manages the cure window. We spray foam to the specified thickness in multiple passes, controlling the ratio and drum temperature so the foam cures properly. We air seal rim joists, band joists, rim board penetrations, and the edges of the foam where it meets the existing structure. In an attic with ductwork, we foam around the ducts. In a crawl space on brick piers, we foam the rim and band joists and the walls, leaving the inspection strips that your pest bond requires. In a wall cavity retrofit, we inject foam into the closed cavity from the exterior or interior. We do not spray over wet, contaminated or leaking substrates. If your crawl space has standing water or your attic has an active roof leak, we fix the moisture first or we walk away.

When the foam is cured, we clean up the site and walk through with you. We leave your property clean and your space ready to use after the re-entry window closes, typically 24 to 48 hours.

Pricing for spray foam insulation in Atlanta depends on the area to cover, the R-value and thickness you need, the foam type (open or closed cell), and whether existing insulation has to be removed first. Attic foam typically runs from $1.50 per square foot for open-cell work to $1.20 per board foot for closed-cell, with the final cost determined by the depth and coverage your attic requires. Wall and injection foam retrofit runs from $2 per square foot. A crawl space project starts around $2,500 and scales with the size of the space and the wall area to cover. Rim and band joist sealing starts at $650. If you have old, wet, or contaminated insulation that has to come out first, removal runs from $950, and the cost of the new foam goes on top. We give you a free estimate by phone at (678) 931-8735, and we schedule an on-site assessment so we can write a firm price with R-value and thickness specified. Call us to discuss your specific situation and get a number.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Atlanta and nearby areas.

I live in a 1920s bungalow in Inman Park on brick piers, and my crawl space is damp every summer. Should I seal it with spray foam?

Yes, but only after you address the moisture. A damp crawl space in Atlanta sits over red clay that wicks moisture upward, especially in summer humidity. We assess the crawl space for standing water, grading, gutters, and downspout discharge. If water is draining properly and the dampness is vapor transmission through the soil, closed-cell spray foam on the rim and band joists and the walls will stop air and moisture movement and keep your floors warmer and drier. If there is standing water or poor drainage, that has to be fixed first. Call us at (678) 931-8735 to walk through your specific crawl space.

My attic hits 150 degrees in summer and my cooling bill is out of control. How much will attic spray foam save me?

We cannot promise a specific dollar amount or a percentage savings, because your actual savings depend on your HVAC system, your thermostat settings, your home's air tightness, and how much of your cooling loss is through the attic versus other leaks. Industry data shows that typical energy improvements from insulation and air sealing run 15 to 40 percent, but that is not a guarantee. What we can tell you is that if your attic has poor or missing insulation and your ductwork is routed through that hot space, you are losing conditioned air through uninsulated ducts and through the attic itself. Spray foam to R-38 or R-49 (depending on your code) stops that loss. Get a free estimate at (678) 931-8735 and we will show you the area to cover and the cost.

I have a finished room over my garage in a Brookhaven two-story, and it is always too hot or too cold. What will spray foam cost?

The finished room over the garage is one of the most common Atlanta comfort problems because the attic above it is poorly insulated or the walls are hollow, and the garage itself is unheated. We assess the attic above the room, the exterior walls, and the band joist at the top of the garage wall. If the attic needs foam, that runs from $1.50 per square foot for open-cell work. If the exterior walls need injection foam retrofit, that runs from $2 per square foot. If the garage band joist needs sealing, that starts at $650. We give you a free estimate with measurements and a firm price. Call (678) 931-8735.

Who requires permits for spray foam insulation work in Atlanta, and who inspects it?

Permits and inspection requirements vary by location across Greater Atlanta. The City of Atlanta and surrounding jurisdictions enforce the energy and building code in force at your address, and the local building official sets the R-value, attic ventilation, ignition barrier, and thermal barrier requirements that apply to your project. We help you navigate what applies at your specific address and we work with your local building department. Check the City of Atlanta website for permit requirements in your area, or call us at (678) 931-8735 and we will advise you on what applies.

We are living in the house during the spray foam work. How long before we can use the attic or crawl space again?

We set up mechanical ventilation during the spray and cure, so the smell and fumes stay contained and do not migrate into your living space. The re-entry window is typically 24 to 48 hours after the foam is sprayed, depending on temperature and humidity. We will tell you the specific window when we schedule the work. You do not have to leave the house, but we ask that you keep the attic or crawl space access closed during cure.

Are you insured for spray foam insulation work in Atlanta?

Yes. We are fully insured with general liability and workers' compensation coverage. Our insurance protects your property and our crew during the work. When you get an estimate from any spray foam contractor, always ask to verify their insurance coverage and confirm it is current.

When is the best time of year to schedule spray foam insulation work in Atlanta?

Work runs year-round in Atlanta, but the timing depends on your urgency and your comfort problem. If your cooling bill is high in summer or you have a room that never cools, spring and early summer are the best time to schedule, so the foam is cured and working before the heat hits. If you have damp insulation or condensation in a crawl space, that is visible year-round and should be addressed as soon as you can. Winter is a quieter season and scheduling is sometimes easier. Call (678) 931-8735 to discuss your situation and find a time that works.